How to Replace Door Locks
It isn't easy to change your door lock. It is crucial to secure your home from burglars. It is also advisable to change your locks when you move in with an additional housemate or if you lease out your home.
Most new locks have been designed to fit standard width doors. If your door is more thick, you will need a "thick-door" kit with longer screws and longer tail pieces for the deadbolt.
Removing the old lock
It is necessary to remove the old lock from the door before you install the new one. You can do this using some simple tools, but be careful not to damage the door or frame. Using the right tools will save you money on future repairs.
Take off the screws that are the trim and handle. This can be accomplished using the help of a screwdriver. After the screws have been removed, you can pull the trim off. You will then be able to get to the screw that holds the handle and trim to the door. After removing the screw then, you can take off lock cylinder and open handle.
If you're unable to turn your keys inside, it is a sign that the lock is not working. This is because the tumblers wear out and eventually stopping their movement upwards or downwards, causing the lock to cease to function. You'll need to have the lock changed by a locksmith if this happens.
Begin by removing the screws holding the faceplate to its place. If the kit you purchased does not come with new screws, you can purchase them at a hardware shop. If you are installing a mortise locking you'll also have to remove the screws that attach the external roseplate to the door. After you've removed the screws take the plate and dead bolt from the door.
Next, search for a pinhole in the interior trim of the handle. If you find one, insert a straightened safety pin into it. You could also try using a flat screwdriver in an opening or slot. This should open the lock handle and expose screws which can be removed in order to remove the entire lock from the door.
Installing the new lock
Installing a new lock could be done with ease regardless of whether you need to replace your lock following an incident of burglary, or just want to improve your door's appearance. However, it's important to measure your door to ensure that you buy a new lock that is the proper size for your door. This is especially crucial for deadbolts that need to be a certain size in order to fit in the strikeplate and pocket of the bolt. If you're not sure how to measure, you can seek help from your local hardware store or locksmith.
If you're replacing a mortice lock, make use of the existing centre rail as a reference for the positioning of the new mortise lock. Once you have marked the location of the lock, drill holes along the central line of the same size as the lock. Then, chisel away the wood until you have a neat rectangular space for the mortice lock to fit into. After that, you can insert the lock and outline the faceplate using an outline knife. Mark and drill holes for screws to fix the faceplate in place.
You can save money when making rekeys on locks by buying a starter set that includes an re-keyable key as well as an unlocked key. Kits can be purchased from a variety of online retailers as well as hardware and home improvement stores. The kits also come with instructions to assist you in completing your task.
Check your lease agreement if you are renting before changing locks. It may require you to provide the landlord with an access key to the new lock. It is possible to replace the old lock with a standard one if you are required to do this. You can purchase a standard lock from your nearest hardware retailer, or buy a smart lock that connects to the Wi-Fi of your home and allows you to lock and unlock your door remotely. Schlage Smart Lock is compatible with all knobs and levers. The system can also be linked to your smart home security hub which allows you to receive alerts whenever your door is opened or locked.
Installing a new lock
A broken lock is an enigma for security, which is why it is essential to replace it as quickly as possible. It's easy to replace locks for doors. The first step is to remove the lock that was previously installed from the door. The screws that hold it in place are removed and the lock is removed. You may require either a screwdriver or an Allen wrench, depending on the kind of lock you own. Once you've removed the lock that was previously used, save all of the components and place them in a secure location.
Next, install the new lock on the door. Most kits include an example of cardboard that shows how the lock will be fitted onto the door. If the template doesn't match up with your door you can trace around the template with a pencil, or use a chisel to remove any extra material. Once the new lock has been put installed, ensure that the latch plate inside is aligned with the mortise lockset hole for an ideal fit.
Be cautious not to tighten too much the lock while installing it. This can cause the lock to squeak or even break. If you have a keyed lock ensure that the spindle is in alignment with the hole in the knob. If it's not, you can use the screwdriver to push the lock into the knob.
After you've installed the new lock, you can now install the base plate that comes with it. If the lock doesn't come with base plates, you can purchase one that is compatible with your hardware.
Test the new lock to confirm that it is working. You can do this by inserting the key into the lock and turning it until you are sure that it opens. If it doesn't work then you must contact locksmith.
You can also avoid burglaries by having professionals reset your locks. This procedure involves changing the internal lock tumblers to ensure that it will not accept your old keys. This will allow you to feel safe and secure in your home.
Test the new lock
When you are installing a new lock you want to make sure that it operates as intended. It is crucial to follow the instructions. If you don't, you might not be in a position to open your door. If you're not sure of what to do, seek out a professional locksmith assistance. A locksmith can also offer guidance on the best locks for your home.
If you're having difficulty opening your lock, it could be an issue with the latch or handle. It is possible to lubricate the latch with graphite or spray it with WD-40. In some instances, this will fix the issue. However, you may have to replace the latch completely if it's not working correctly.
Another possibility is that the lock was installed incorrectly. The door handle clip could be damaged or gone from the new lock. In this instance it is recommended to grab the handle from the inside and insert the new clip made of plastic. The handle is then connected to the lock, and the lock tested.
It is important to test the keypad after you've replaced the lock to make sure it works correctly. You can test it by putting the key in and turning it. If the keypad is functioning properly, it should unlock and lock your door.
You should also examine the deadbolt lock to see if it's functioning correctly. If it's not working then you must take the latch off and remove the Phillips head screws on the sides of the door to release it. Replace the deadbolt that was installed with the new one. Orient and load the deadbolt lock in the correct way.
window lock replacements Repair My Windows And Doors to test the new lock is to use the spindle test. This can be accomplished by inserting an instrument into the spindle. This test should be carried out prior to reinstalling a lock in order to avoid any mistakes.